Back To:

    Products

    Home

STANDARDS REFERED TO ON THIS WEBSITE

• BS7917:1999 - Elastomer insulated fire resistant (limited circuit integrity) cables for fixed wiring in ships and on mobile and fixed offshore units. Requirements and test methods

• BS6883:1999 - Elastomer insulated cables for fixed wiring in ships and on mobile and fixed offshore units. Requirements and test methods

• BS6360:1991 - Specification for conductors in insulated cables and cords currently being superceeded by BS EN 60228:2005

• BS5467:1997 - Electric cables. Thermosetting insulated, armoured cables for voltages of 600/1000 V and 1900/3300 V

• BS7211:1998 - Electric cables. Thermosetting insulated, non-armoured cables for voltages up to and including 450/750 V, for electric power, lighting and internal wiring, and having low emission of smoke and corrosive gases when affected by fire

• IEC 60092-3 - Electrical installations in Ships

• IEC 60092-375 - Shipboard telecommunication cables and radio-frequency cables. General instrumentation, control and telecommunication cables.

• IEC 60332 Pt3 - Tests on electric cables under fire conditions.
  Tests on bunched wires or cables

• IEC60331 - Fire-resistant characteristics of electric cables

• IEC 60754-1/2 - Test on gases evolved during combustion of electric cables.
  Part 1: Determination of the halogen acid gas
  Part 2: Determination of the degree of acidity during the combustion of materials taken from electric cables by measuring pH and conductivity.

• IEC 61034-1/2 - Measurement of smoke density of cables burning under defined conditions.

• CSA C22.2 No38-95 - Thermoset insulated Wires and Cables - Wiring Products
                                  Clause 6.4.4 Low Temperature Flexibility (-40 Deg C)
                                  Clause 6.4.5 Low Temperature Impact (-40 Deg C)

• IEC 60502 - Extruded solid dielectric insulated power cables for rated voltages from 1 kV up to 30 kV

• BS6500

• IEC 60092-350 - Low voltage shipboard power cables.
  General construction and test requirements.

• IEC 60092-352 - Choice and installation of cables for low-voltage power system.

• IEC 60092-351 - Insulating materials of shipboard power cables.

• IEC 60092-354 - Single and three core power cables with extruded solid insulation for rated voltages 6 kV, 10 kV, 15 kV

• IEC 60092-359 - Sheathing materials for shipboard power and telecommunication cables.

• IEC 60092-375 - Shipboard telecommunication cables and radio-frequency cables. General instrumentation, control and telecommunication cables.

• ATS 1000.001 - Preliminary combined fire hazard standard test procedure for non-metallic parts to be installed or employed in the pressurized portion of the fuselage of transport category aircraft.

• NEK 606 - Cables for offshore installation halogen-free and/or mud resistant.

• NVE 1990 FEA-M regulation - Regulation for electrical installations - maritime installations.                        Clause 1238 Methodes of earthing and dimensions.